Werewolf 1/8 Brushless Electric RC Buggy - PRO Version 2.4Ghz

Rating:
100% of 100
$409.99 $459.99
Out of stock
SKU
A2015TPRO
This is our highest spec electric radio control car. Designed with pro racing in mind you can race and win at a National level. It's feature packed with many new exclusive innovations found only on this model puts it ahead of the competition. The Werewolf will go well over 50mph, an upgradeable setup means this buggies potential is endless. PRO Version.
SAVE 11%

Werewolf 1/8 Scale Brushless Electric RC Buggy 2.4ghz - PRO Version | Radio control car

Our highest spec electric radio control car is the all new 1/8th brushless Werewolf. Designed with pro racing in mind this model will allow you to race and win at a National level. It's feature packed with many new exclusive innovations found only on this model that puts it ahead of the competition. The brushless setup with big powerful motor and 11.1V li-po battery allows the Werewolf to go well over 50mph as standard out of the box and then the upgradeable setup. For a race though a model needs to be quick on the corners as well as the straight and the Werewolf certainly has that covered with the highly adjustable settings and high spec design making it an all round race winner.

 

The Werewolf comes in two different versions, standard and pro. Although very similar the pro version has been upgraded with sway bars and front CVD shafts fitted as standard. The pro version also has aluminium shocks with adjustable turnbuckles whereas the standard has plastic shocks.

 

The brushless radio control car comes fully built with everything you need to get racing apart from eight normal AA batteries for the radio handset. As the radio equipment is 2.4G it means many models can be raced together at the same time. This is a high spec radio control car racing model that at full speed requires some real skill to control it. It is therefore recommended for ages 14+

 

Box

 

COUNTERSUNK ALUMINIUM CHASSIS
The solid aluminium chassis features countersunk screws that will protect your model from any rocky or bumpy terrain damage.

Chassis

 
11.1v Li-po BATTERY WITH SIZE ADJUSTABLE BATTERY COMPARTMENT
The big LiPo battery makes the car very fast. The battery compartment is adjustable so can fit other after market batteries and even two batteries can be fitted at the same time.
 

Above

1/8th SCALE
This buggy measures 505mm x 185mm x 310mm (length, height, width)

Size

STEEL GEARED CENTRAL DIFFERENTIAL
As well as front and rear differentials, this model also features a third central differential to give the best possible handling.

Diff


METAL GEARED STEERING SERVO
The gears in the servo have been upgraded from metal to plastic.

Servo


COOLED FAST BRUSHLESS SETUP
Brushless motors are much faster than standard ones. The motor has an aluminium heat sink and the speed controlled has its own fan to keep all the electronics operating at their peak temperature.

Motor

 

 ALUMINIUM CENTRAL DRIVE SHAFT
The front and rear working differentials greatly improve handling. They are connected by a strong aluminium central drive shaft.

Alu

 

ALL NEW 2.4GHz RADIO TRANSMITTER 
All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows multiple RC cars to be used in the same area without interference.

Transmitter

UPGRADED CVD's
The normal dogbones have been upgraded to CVDs in this Pro version.

CVDs 

UPGRADED ALUMINIUM SHOCKS AND SWAY BARS
This pro version has also been upgraded with adjustable aluminium shocks and sway bars have been added.

Suspension

More Information
Model Scale1:8
BuildRTR
Drive4WD
For TerrainOn Road
Radio Equipment2.4 GHz
TypeBuggy
Motor / EngineBrushless
Specifications
  • Height: 185mm
  • Length: 505mm
  • Width: 310mm
  • Wheel base: 315~320mm
  • Track F/R: 310mm
  • Ground clearance: 30mm
  • Weight: 3000g
  • Radio: 2.4Ghz Pistol Type
  • Battery: 11.1V Li-Po With Charger
  • Motor: Brushless with ESC
  • Scale: 1:8
  • Wheels: Black coloured not white as shown in pictures
  • Shocks : Blue coloured
Features
  • 1/8 Scale brushless powered radio control car
  • Extreme High Speeds
  • 2.4G Radio Equipment
  • 4WD Shaft drive system
  • 3 diff. shaft drive 4WD
  • 2.5mm aluminium chassis
  • 3mm F/R Alum. shock tower;
  • High-torque metal geared steering servo
  • Front universal drive shafts (pro version)
  • All linkages set with adjustable turnbuckles
  • Option for four disc brake system
  • Brushless motor, brushless 80A ESC
  • Li-Po battery and balanced charger
  • Plus many more. See below images for rest of features.
Required To Use
  • 4 x AAA Batteries
Spares Link/spare-parts/acme-racing/acme-werewolf-spare-parts.html
Only registered users can write questions. Please Sign in or Create an account
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top