Skyartec SKY602A 2.4GHz 6Ch Transmitter With SKY706 7Ch Receiver

SKY602A is the latest 6Ch transmitter from Skyartec. It is a 2.4Ghz 6ch controller that adopts the brand new digital technology with many features: fast response, high-precision and non-affect servos. The 2.4Ghz frequency sweep enlarges the capacity of its resisting disturbance. Suitable flight mode selecter with normal flight and aerobatics. It comes with the advantage of easy setup, steady signal, small power consumption and a strong signal power. SKY602A is also suitable for beginners interested in moving up to a more advanced radio set.

SPECIFICATION:

Channel: 6CH
Frequency: 2.4G frequency sweep
Output power: <100mW
Static current: <100mW
Power resource: 1.2Vx8"AA" dry battery
Output pulse: 1100-1900Ms
Simulator jack: YES
Charging jack: YES
Weight: 560g
Voltage display type: LED
Antenna lengh: 14cm

Receiver specifications:

Channel: 7CH
Frequency: 2.4GHz
Sensitivity: -95dbm
Weight: 15g
Size: 43x21x10mm

Transmitter indicator's description

1. Three indicator lights (red, yellow and green lights) are bright: the battery has been fully charged.

2. Two indicaor lights (red and yellow lights) are bright: the batteries are getting low, if you continue to fly maybe you will loose control.

3. Only red light is bright: the batteries are very low. you should stop flying immediately.
  
Instruction for code pairing of transmitter and receiver:

First trun on the transmitter and connect the receiver

1. Press the code pairing button for about 4-6 seconds, the LED starts flashing fast.
2. After letting go of the button, the LED is lit constantly, this indicates code pairing is successful.
3. If the LED is not lit, it indicates code pairing failed without signal and you should start again.

Remark: Code pairing should not be needed if done before and usually at the factory. Only needed if for some reason they have become unpaired.