Change Currency:

AeroSky C6 Carbon 6 Channel RC Drone With GPS - PNP

Be the first to review this product


Quick Overview

The C6 is a top of the range radio controlled drone for advanced aerial photography and filming. The GPS autopilot system is taken to the next level with a USB programmable MWC flight control board at the center fitted with Arduino programmed Tmega2560 CPU, MPU6050 gyro / accelerometer, HMC5883 MAG, and MS5611 barometer. This makes the drone very smart indeed with features such as position hold, altitude hold, return to home, headless navigation and even advanced route plotting. This is a big model measuring 60cm across and powered by four 920KV brushless outrunner motors and supported by four brushless 40 amp Hobbywing Skywalker electronic speed controllers. This impressive power system nets a payload capacity of up to 500g. This allows the drone to carry FPV camera systems or other recording devices that can be applied to entertainment, aerial photography, and other aero activities. The frame structure is constructed of strong carbon fiber tubing and plates that enhance rigidity and crash worthiness. The main boards are constructed with high strength compound PCB frame board, which makes wiring of electronic speed controllers and battery leads safer and easier. The optimized frame design also provides abundant assembly space for autopilot systems. The arms can be folded for easy storage and transportation and the landing gear can be removed as well.


Click Here To Quickly Check Shipping Price

In stock

Only 1 left


With this product, you earn 450 loyalty point(s).

AeroSky C6 Carbon 6 Channel RC Drone With GPS - PNP

Click Below For Larger Images



The C6 is packed with the latest cutting edge drone technology. They are used not only by hobbyists for fun but also for professional use, mainly for aerial filming and remote viewing. If you're new to RC drones then here is an introduction to the cool features found on this model:

GPS Automatic Take Off & Landing

With a normal radio controlled helicopter or quadcopter one of the most difficult things is taking off and landing. For beginners it usually leads to crashes. But with GPS automatic take off just arm the system and then select take off. The drone will automatically take off and hover without any further input needed! Ready to land? You no longer need to carefully reduce throttle while trying to keep the model flat, instead just hit the land switch and the drone will automatically land itself!

GPS Position Hold

No more having to constantly adjust for wind and movement. With GPS position hold you can let go of the controls and the drone will stay hovering in that position. This makes flying so much easier and stable. The GPS module knows where it is so can stay at those co-ordinates even if the wind blows.

Route Plotting Software

Using open source mission planner software you can pre-programme a flight path for the drone to fly. This software shows no fly zones and detailed earth views, perfect for site monitoring and advanced applications.

Compass Function

The compass function makes flying the RC drone much easier. Without this feature a drone will be controlled like a helicopter whereby to go in a certain direction the helicopter must be rotated to face that direction and then you go forward. With the compass turned on it no longer matters which way the drone is pointing, when you push forward on the transmitter the drone will always move away from the take off position, and the same with the other directions regardless of which way it is pointing.

Altitude Hold

With industrial grade MEMS sensors the C6 will also hold it's height automatically with less drift than other drones on the market. Unlike a traditional helicopter or quadcopter the throttle stick is spring loaded as altitude control becomes much simpler. You can just push up to make the drone fly higher and push down for lower but then just release the throttle to hover at that height.

GPS Return To Home On Signal Loss Or Request

The GPS return to home feature is fantastic. The drone remembers the coordinates that it took off from. If you fly outside the transmitter range or the signal is lost for any reason such as your transmitter batteries go flat then the drone will automatically return to where it took off and land. You also have the option to enable return to home at any time even if the signal is not lost by just flipping the return to home switch.

Low Voltage Safety

Another great feature that will keep your drone safer. The on-board computer will detect if the battery voltage is getting low and transmit a warning to the pilot to let you know it's time to land. If the battery gets even emptier then the drone will then proceed to land itself to ensure it does not stall and crash.

500g Payload

This is more than enough to carry most mini HD video cameras like the Go Pro or Sony Action Cam for high quality recording. This higher payload also allows fitting of an automatic PTZ (pan, tilt, zoom) camera mount. This smart electronic mount has a built in computer that will keep your camera level even if the drone tilts forwards or backwards.

Modular Design

You may have seen some other drones on the market that are enclosed in a white one piece case. Although these may look a little nicer in practical terms they are not as good. If you do have a crash it usually means the whole system needs transferring to a new case but with a modular design like on the C6 just the broken arm or part can be replaced. The parts are made from special high impact carbon fiber but if you did need to replace any part we stock all the parts for making easy repairs.


We're very confident that you will not find an RC drone with all the features at this price, even drones with less features sell for a lot more.

Additional Information

Manufacturer AeroSky
Build ARF
Radio Equipment 2.4 GHz
Motor / Engine Brushless
Blades Single Blade
Channels 6 Ch
  • Dimensions: 60cm x 60cm
  • Height: 35cm
  • Weight: 40.56oz
  • Four 10x4.5 inch Propellers
  • Payload: 500g
  • Suggested Radio System: 6ch transmitter and receiver
  • Suggested Battery: 14.8V 4s 2200mah Li-Po
  • Motors: 4 x 2217 Out Runner Brushless 920KV Motors
  • ESC: 4 x 40A Hobbywing SkyWalker Brushless Electronic Speed Controllers
  • Arduino Compatible
  • Pre-soldered and tested
  • 3-axis gyro, accelerometer, magnetometer and high-performance barometer
  • Built in 4 MP Dataflash chip for automatic data logging
  • Honeywell HMC5883L-TR Digital compass
  • Invensense's 6 DoF Accelerometer/Gyro MPU-6000
  • Measurement Specialties MS5611-01BA03 Barometric pressure sensor
  • Atmel ATMEGA2560 and ATMEGA32U-2 (processing and USB function)
  • Ultra Strength Carbon Fiber Material
  • Advanced GPS System
  • Integrated PCB wiring
  • Huge Assembly Space
  • Gorgeous Frame Arms
  • Standalone GPS receiver
  • U-blox NEO-6M GPS module
  • Under 1 second time-to-first-fix for hot and aided starts
  • SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
  • Anti-jamming technology
  • U-blox 6 50 channel positioning engine with over 2 million effective correlations
  • Time pulse
  • 5Hz position update rate
  • Operating temperature range: -40 TO 85°C
  • UART TTL socket
  • EEprom to store settings
  • Rechargeable battery for Backup
  • Build in 18X18mm GPS antenna
  • RoHS compliant
Required To Use
  • 14.8V Lipo Battery Charger
  • Computer to program board
  • Radio System: 6ch transmitter and receiver
  • Battery: 4s 2200mah

Available Downloads For This Item:

Write Your Review

Only registered users can write reviews. Please, log in or register

Questions And Comments:

Posted by Richard Allen, Friday, February 20, 2015 on product AeroSky C6 Carbon 6 Channel RC Drone With GPS - PNP


I just got my AeroSky C6 Carbon 6 Channel RC Drone With GPS - PNP there is nothing in the instructions telling how to connect to the computer. I did connect the UBS to my computer, but nothing shows as connected. Lights on the C6 do come on. What am I missing ?


  • Posted by Geo Rodriguez on Friday, February 20, 2015

    You have to get the program needed to be able to access the routine planning and ground station features. This main board supports advanced programs such as "Mission Planner" and "Andropilot". 

Ask a question and Give an answer. Help your fellow customer.

Ask Your Question

* Required Fields