Condor Pro Special Edition Nitro Buggy

$329.99 $359.99
Out of stock
SKU
A3002TSE
We have taken a standard Condor Pro and then crammed it with all the best optional parts that if purchased separately would cost a lot more. The Condor Pro Special Edition is the top of the range nitro RC car, with all the aluminium upgrades and performance enhancing parts the Condor Pro becomes a stronger and better performing model.
SAVE 8%

The Condor Pro Special Edition is the top of the range Acme nitro RC car with many hop ups installed as standard. With all the aluminium upgrades and performance enhancing parts the Condor Pro becomes a stronger and better performing model. We have taken a standard Condor Pro and then crammed it with all the best optional parts that if purchased separately would cost a lot more. Top that of with the visual enhancements of the blue machined aluminium parts and polished aluminium exhaust and you have got one awesome looking and performing buggy.

As well as all the features found on the standard Condor Pro this SE version includes the following:

  • Aluminium upper wishbones
  • Aluminium lower wishbones
  • Aluminium servo saver
  • Aluminium knuckle arms
  • Polish aluminium pipe
  • Hardened steel engine clutch gear
  • Hardened spur gear

Like the standard Condor Pro this special edition still comes fully built with radio equipment pre-installed. Acme Tech models now come with high quality SH engines. SH engines are made in Taiwan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market. Nitro engines usually have two or more tuning needles but these only have a single adjustment that makes them much easier to use without sacrificing any power.

A3002TSE Box

 

PRO VERSION WITH UPGRADED ALUMINIUM PARTS
This model has been crammed with aluminium upgrades that look fantasic and make the buggy stronger.

A3002TSE Upgraded Parts

 

1:10th SCALE MODEL
This 1:10th scale RC buggy measures in at 430mm x 267mm x 155mm (length, width, height)

A3002TSE Dimensions

 

4WD WITH FRONT AND REAR DIFFS
This model has a 4 Wheel Drive system which evenly transfers the power from the rear to the front. The 4WD system gives better off road ability and better handling. The buggy also features working front and rear differentials that further greatly improve handling and performance.

A3002TSE 4WD

 

FULLY BALL RACED SYSTEM
The buggy is fully ball raced meaning that the normal metal bearings are upgraded to ball bearings which are smoother with less friction therefore making the car faster.

A3002TSE Ball Bearings

 

SH .18 SIZE PULL START ENGINE
This rapid, all-new SH .18 pull start engine is made in Taiwan to ensure the best quality and speed.

A3002TSE Engine

 

FULL ALUMINIUM SHOCKS
Strong aluminium shocks connected to solid aluminium shock towers. Both the angle of the shocks and the tension can be adjusted to suit your driving preference and terrain.
A3002TSE Shocks

UPGRADED POLISHED ALUMINIUM EXHAUST
On this special edition the standard plastic exhaust has been upgraded to a polished aluminium version that gives a small performance boost.

A3002TSE Fuel Tank

 

UPGRADED TWO SPEED AUTOMATIC GEAR BOX
The two speed gear box changes gears automatically. It uses the first gear for quicker acceleration and the second gear for a higher top speed. The first gear has been upgraded to special harder Delrin material and the pinion gear is upgraded to steel to reduce the possibility of stripping any gears.

A3002TSE Body Shell

 

ANTI ROLL BARS
Pre-fitted anti-roll bars that greatly improve cornering ability and handling.

A3002TSE Anti Roll Bars

 

2.4GHz RADIO EQUIPMENT
A new 2.4GHz radio system is used that allows multiple models to be used in the same area without interference.

A3002TSE Transmitter

 

More Information
Model Scale1:10
BuildRTR
Drive4WD
For TerrainOff Road
Radio Equipment2.4 GHz
TypeBuggy
Motor / Engine.18 Nitro
Specifications
  • Width: 267MM
  • Height: 155MM
  • Track: 240MM
  • Length: 430MM
  • Wheelbase: 280MM
  • Gear ratio: 5.69:1 (High), 7.83:1 (Low)
  • Engine: SH .18 size pull start
  • Wheel dia.: 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance: 27MM
Features
  • Fully Upgraded Special Edition!
  • 1/10 Scale nitro powered car
  • 4WD Shaft drive system
  • Fully ball raced system
  • SH 18 size pull start engine
  • Aluminium oil-filled shocks
  • Two speed automatic gear box
  • Front and rear bevel differentials
  • 75CC Fuel tank
  • Metal disc brake system
  • Pre-painted and cut body shell
  • Sealed box for protecting receiver system
  • Anti-roll bars pre-fitted
  • High quality 2.4Ghz Radio Equipment.
Required To Use
  • 4 x AA Batteries and 4 x AAA Batteries
  • Model Fuel
  • Glowstarter
Spares Link/spare-parts/acme-racing/acme-condor-buggy-spare-parts.html
Only registered users can write questions. Please Sign in or Create an account
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top