Raptor Radio Controlled Electric Truggy - Brushed Version

This is a proper radio controlled race ready model with front and rear gear differentials, electronic speed controller and powerful 540 motor. The Raptor truggy is a high performance, high speed speed machine. With its unique truggy tyres and low centre of gravity design the models performs both on and off the tarmac. The 4WD system with front and rear differentials evenly distributes the massive power to the wheels making the Raptor a race winner.

The 4WD system not only improves handling but reduces wheel spin giving quicker acceleration. Each wheel has its own independent wishbone suspension with an oil filled shock which also improves the performance of the model. Along with the 4WD it also means the Raptor has good off road abilities. The electronic speed controller allows you to put the power down gradually as needed with the brake allowing you to enter corners quicker and then power out of the other side. Pushing the brake a second time activates reverse allowing you to back up if you get stuck. The front a rear gear differentials improve cornering massively and like on a real car are essential at high speeds.

1:10th SCALE MODEL
This 1:10th scale truggy measures in at 410mm x 260mm x 140mm (length, width, height)

4WD SHAFT DRIVE SYSTEM WITH DIFFERENTIALS
This model has a 4 Wheel Drive system with a strong aluminium drive shaft evenly transferring the power from the rear to the front. The 4WD system gives better off road ability and better handling. These hobby grade RC cars also feature working front and rear differentials that further improves handling.

HIGH SPEED 540 BRUSHED MOTOR
A big 540 fast motor that can send your model around tracks at high speeds. The motor is connected to an electronic speed controller for full proportional control in both forward and reverse.

OIL FILLED SHOCKS
Both the tension and angle of the shocks can be adjusted to suit your driving preference and terrain.

7.2v BATTERY
This model comes complete with a 7.2v Tamiya type battery and charger. These batteries made specially for RC cars are designed to pump the power out quickly to push the model to the maximum speed.

SLEEK BODY SHELL
The truggy white body shell comes pre-painted and pre-cut.

2.4GHz RADIO
All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows mulitiple RC cars to be used in the same area without interference.

ALUMINIUM CHASSIS
A solid blue aluminium chassis with all countersunk screws to keep the base perfectly flat.